It is easy to assemble and operate. Holding rack can be adjusted according to the length of printing stock. Height of the screen frame also can be adjusted. Whole item design with stainless steel plate, keep the printer stable and avoid rusty.
Most part of this printer is adjustable, it can be set to different position according to request. For example, such as the height and gravity hammer's location. More fun are waiting for you to discover. Do not suit for cone shape item. Difference from the traditional cylinder press type is, this printer adopt spring to lift up the screen frame, not a heavy balance plate.
And the lifting angle could also be adjusted. Four sliders connected to the optical axis to make the screen frame slide back and forth, it is easy and smooth to push and pull. Screen frame is fixed on the printer with 4 screws. Adopt two pieces ink scraper, will keep to scrape the ink cleanly.Andle can be installed vertically or in parallel according to the operator's needs. Substrate placement rack can be moved back and forth within 5.5inch (140mm). Max printing height: 140mm/ 5.5inch. Max printing object length: 160mm/ 6.3inch. Suit for cylinder items that diameter within 80mm/ 3inch. Screen frame size (outer size): 11.8x9.2x 1inch (300x235x30mm). This printer equip with 2 screen frames, with no mesh. 1 set of manual cylinder screen press with 2pcs blank screen frame---006595. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "yaxun_shopping23" and is located in this country: US. This item can be shipped to United States.